Gear Shift Sensor GSS-2

This sensor is designed to measure force relative to gear shifting in order to control the engine operation allowing the driver to maintain no-lift-shift/full throttle during shifting (up and down).

A circuit of precise resistors and an integrated amplifier supply a force dependent output voltage signal. As soon as this signal exceeds a certain threshold value in the ECU, the ignition and injection can be adjusted automatically according to the individual ECU application.

The main feature and benefit of this sensor is the combination of high quality production part and robust design with metal housing and motorsport spec connection. Furthermore this sensor has a dual way functionality.

Features

  • Max. vibration: 800 m/s2 at 5 Hz to 2 kHz
  • Weight w/o wire: 90 g
  • Output signal: 0.4 to 4.5 V

Application

Measuring range

-450 to 450 N

Max. vibration

800 m/s2 at 5 Hz to 2 kHz

Operating temperature range

0 to 80°C

Technical Specifications

Mechanical Data

Weight w/o wire

90 g

Size

65 x 16 x 16 mm

Mounting

2 x M10 x 1

Tightening torque

22 Nm

Mech. range programmable up to

450 N

Fmax

800 N

Mech. load limit

1800 N

Max. cycles at 300 N

300,000 cycles

Electrical Data

Power supply

12 V

Characteristic

Signal Output

0.5 to 4.5 V

Zero Output

2.5 V

Connectors and Wires

Connector

ASL606-05PC-HE

Mating connector

ASL006-05SC-HE

F 02U 000 228-01

Pin 1

US

Pin 2

Gnd

Pin 3

Sig

Pin 4

-

Pin 5

Scr

Various motorsport and automotive connectors are available on request.

Sleeve

DR-25

Wire size

AWG 24

Wire length L

15 to 100 cm

Please specify the required wire length with your order.

Sensor voltage

Force (N)

Voltage (V)

450

4.673

360

4.225

270

3.797

180

3.397

90

2.941

0

2.538

-90

2.141

-180

1.672

-270

1.255

-360

0.820

-450

0.402

Installation Notes

The GSS-2 can be connected directly to most control units and data logging systems.

Please avoid abrupt temperature changes.

For mounting please use only the integrated thread.

Please ensure that the environmental conditions do not exceed the sensor specifications.

Please find further application hints in the offer drawing at our homepage.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Gear Shift Sensor GSS-2

Order number: B 261 209 227-01

Downloads