Linear Position Sensor LP 100

The LP 100 is a linear potentiometer which is designed to measure the relative position of two points, e.g. the gear position, throttle position or suspension movement.

The operating mode of this sensor is based on the linear tape potentiometer principle where the distance travelled between the moving end to the wiper is proportional to the resistance between them.

The advantage of this LP is its compact and lightweight design together with its wider operating temperature range.

Features

  • Application: 0 to 100 mm
  • Housing: Aluminum
  • Weight w/o wire: 85 g
  • Technology: Linear tape
  • Output signal: 0.025 to 4.975 V

Application

Application

0 to 100 mm

Temperature range

-40 to 100°C

Max. vibration

126 m/s2 at 10 to 12 kHz

Technical Specifications

Mechanical Data

Weight w/o wire

85 g

Min. length [L1]

227 mm

Mounting

2 x M5

Tightening torque

10 Nm

Protection

IP65

Electrical Data

Power supply

5 V

Power supply max.

74 V

Nominal resistance

4 kOhm

Resistance tolerance

10 %

Non-linearity

0.15 %

Connectors and Wires

Connector (see Ordering Information)

KPSE 6E8-33P-DN-A34

Connector loom
KPSE 0E8-33S-DN

F 02U 000 115-01

Pin 1

US

Pin 2

Gnd

Pin 3

Sig

Or

 

Connector (see Ordering Information)

ASL 6-06-05PA-HE

Connector loom
ASL 0-06-05SA-HE

F 02U 000 226-01

Pin 1

US

Pin 2

Gnd

Pin 3

Sig

Pin 4

-

Pin 5

-

Sleeve

DR-25

Wire size

AWG 24

Wire length L

15 to 25 cm

Various motorsport and automotive connectors on request.

Please specify the requested wire length with your order.

Installation Notes

The LP 100 can be connected directly to most electronic control units and data logging systems.

Each mounting orientation is possible.

Please find further application hints in the offer drawing at our homepage.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Linear Position Sensor LP 100

Connector KPSE 6E8-33P-DN-A34

Order number: B 261 209 853-01

Linear Position Sensor LP 100

Connector ASL 6-06-05PA-HE

Order number: B 261 209 857-01

Downloads

Documents