Pressure Sensor Fluid PSC-10

This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air. The sensor is available for two different supply voltage ranges.

The sensor uses stainless steel measuring cells with piezo-resistive measuring bridges in thin layer technique, which are hermetically welded together with stainless steel pressure ports. This guarantees a complete media compatibility.

The main benefit of this sensor is the high quality of a production part at a low price.



  • Application: 0 to 10 bar
  • Response time: 1.5 ms (5 V Variant) or 1 ms (12 V Variant)
  • Pressure reference type: Absolut
  • Power supply: 5 or 12 V
  • Weight: 45 g



0 to 10 bar (a)

Pressure reference type


Max. pressure

20 bar

Operating temp. range

-40 to 125°C

Media temp. range

-40 to 125°C

Storage temp. range

-20 to 50°C

Bio fuel compatibility

E 85 / M 100

Max. vibration

100 m/s2 rms at 10 to 2,000 Hz

Technical Specifications



PSC-10 (5 V)

PSC-10 (12 V)

Power supply US

4.75 to 5.25 V

9 to 30 V

Full scale output UA

10 to 90 % US ratiometric

0 to 5 V non-ratiometric

Response time T10/90

1.5 ms

1.0 ms


400 mV/bar at US = 5 V

500 mV/bar


500 mV at US = 5 V

0 mV

Pin 1



Pin 2



Pin 3



Pin 4



Pin 5



Mechanical Data

Male thread


Wrench size

19 mm

Installation torque

15 Nm

Weight w/o wire

45 g


O-ring 8.1 x 1.6 mm

Electrical Data

Power supply US

Please see variations

Max power supply US max

± 30 V

Full scale output UA

Please see variations

Current IS

8 mA


Response time T10/90

Please see variations

Compensated range

0 to 90°C

Tolerance (FS) at US = 5 V

± 0.1 bar

Tolerance (FS)

± 1 %


Please see variations


Please see variations

Connectors and Wires



Mating connector




Wire size

AWG 24

Wire length L

13 to 95 cm

Various motorsport and automotive connectors are available on request.

Please specify the required wire length with your order.

Installation Notes

The PSC-10 can be connected directly to most control units.

The sensor has a protection for over voltage, reverse polarity and short-circuit.

Please do not fix the sensor directly to the engine block to avoid undesired strong vibrations.

Each mounting orientation is possible.

The sensor meets all EMV, EMC and ESD automotive standards.

Please find further application hints in the offer drawing and free download of the sensor configuration file (*.sdf) for the Bosch Data Logging System at our homepage.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Pressure Sensor Fluid PSC-10

4.75 to 5.25 V

Order number: F02U.V01.268-01

Pressure Sensor Fluid PSC-10

9 to 30 V

Order number: F02U.V01.295-01

Legal Restrictions

Due to embargo restrictions, sale of this product in Russia, Belarus, Iran, Syria, and North Korea is prohibited.