
This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air.
The sensor utilizes a flush metal diaphragm as a force collector. The force is transferred to a solid state piezo-resistive sensing element via a thin intervening film of noncompressible silicone oil. The housing is welded hermetically. An individual calibration sheet will be delivered with each sensor.
The main feature and benefit of this sensor is a good protection against vibrations.
- Downloads
- Features
- Application
- Technical Specifications
- Installation Notes
- Ordering Information
- Legal Restrictions
Downloads
Features
- Application: 0 to 3.5, 6, 10, 20, 35, 60, 70, 100, 200, 350, 700 bar
- Response time: 1 ms
- Pressure reference type: Absolut
- Power supply: 8 to 30 V
- Weight: 13 g
Application
Pressure measurement range versions |
3.5 to 700 bar |
Pressure reference type |
absolute |
Operating temp. range |
-40 to 150°C |
Vibration |
2 g (10 Hz to 60 Hz) and 20 g (60 Hz to 1 KHz) |
Shock (1/2 sine) |
50 g (11 ms) and 200 g (6 ms) |
Bio fuel compatibility |
E85/M100 |
Technical Specifications
Mechanical Data
Housing | Stainless steel |
Male thread | M8x1 |
Wrench size | 11 mm |
Installation torque | 2.5 Nm max. |
Weight | 13 g + 20 g per meter of cable |
Sealing | O-ring 6.35 x 1.6 VITON |
Ingress Protection | IP66 |
Electrical Data
Supply voltage | 8 to 32 V DC |
Max current | < 8 mA |
Non-Repeatability | ± 0.05 % FSO typ. |
CNL & H | ± 0.25 % FSO |
Bandwidth (-3 dB) | 400 Hz |
Output “FSO” | 0.5 to 4.5 V = 4 V ± 50 mV |
Characteristic
Compensated range | 20 to 120°C |
Long term stability | Offset = 0.1 % span/year; Span = 0.1 %/year |
Zero offset at 23°C | 0.5 V ± 50 mV (0.5 ± 100 mV for ranges ≤ 10 bar or 150 psi) |
Sensitivity/Offset | (an individual calibration sheet will be delivered) |
Thermal zero shift “TZS” | ± 1 % FSO/100°C (± 2 % FSO/100°C for ranges ≤ 10 bar or 150 psi) |
Thermal sensitivity shift “TSS” | ± 1 %/100°C (± 1.5 %/100°C for ranges ≤ 10 bar or 150 psi) |
Connectors and Wires
Connector | ASU603-05PC-HE |
Mating connector | F02U.000.208-01 |
Pin 1 | US |
Pin 2 | Gnd |
Pin 3 | Sig |
Pin 4 | - |
Pin 5 | Scr |
Sleeve | Viton |
Wire size | AWG 24 |
Wire length L | 15 to 100 cm |
Various motorsport and automotive connectors are available on request. | |
Please specify the required wire length with your order. |
Installation Notes
The PSM-SA can be connected directly to most control units. |
Each mounting orientation is possible. |
Please do not fix the sensor directly to the engine block to avoid undesired strong vibrations. |
100 % relative humidity is possible. |
The sensor meets all EMV, EMC and ESD automotive standards. |
Please find further application hints in the offer drawing at our homepage. |
Safety Note
The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system. |
Ordering Information
Pressure Sensor Fluid PSM-SA
0 to 3.5 bar
Order number: F02U.V01.946-01
Pressure Sensor Fluid PSM-SA
0 to 6 bar
Order number: F02U.V01.947-01
Pressure Sensor Fluid PSM-SA
0 to 10 bar
Order number: F02U.V01.948-01
Pressure Sensor Fluid PSM-SA
0 to 20 bar
Order number: F02U.V01.949-01
Pressure Sensor Fluid PSM-SA
0 to 35 bar
Order number: F02U.V01.950-01
Pressure Sensor Fluid PSM-SA
0 to 60 bar
Order number: F02U.V01.951-01
Pressure Sensor Fluid PSM-SA
0 to 70 bar
Order number: F02U.V01.724-01
Pressure Sensor Fluid PSM-SA
0 to 100 bar
Order number: F02U.V01.952-01
Pressure Sensor Fluid PSM-SA
0 to 200 bar
Order number: F02U.V01.953-01
Pressure Sensor Fluid PSM-SA
0 to 350 bar
Order number: F02U.V01.954-01
Pressure Sensor Fluid PSM-SA
0 to 700 bar
Order number: F02U.V02.064-01
Legal Restrictions
Due to embargo restrictions, sale of this product in Russia, Belarus, Iran, Syria, and North Korea is prohibited.