Rotary Position Sensor RP 100/130/308

This sensor is designed to measure rotational movement, e.g. throttle angle, spring travel, gearbox position or steering angle.

A throttle rotation moves an internal slider (wiper) on a resistive element which is supplied with voltage. Thus voltage proportional to the angle can be measured. The housing and the bearings are made of high temperature resistant plastic. The mounting plate is protected with a metal cover to ensure a good fixation. The sensor is fitted in a shrink down boot for additional protection.

The main benefit of this sensor is the combination of both high accuracy and motorsport spec connection.

Features

  • Application: 0 to 100°, 0 to 130° or 0 to 308°
  • Technology: Linear tape
  • Rotating direction: Anticlockwise
  • Output signal: 0 to 5 V

Application

Application

Please see variations

Operating temperature range

-40 to 150°C

Max. vibration

200 m/s2 at 5 to 2,000 Hz

Technical Specifications

Variations

 

RP 100

RP 130

RP 308

Application

0 to 100°

0 to 130°

0 to 308°

Total resistance

3 kOhm ± 20 %

3 kOhm ± 20 %

5 kOhm ± 20 %

Mechanical Data

Weight w/o wire

32 g

Protection class

IP65

Mounting

2 x M4

Lifetime

50 x 106 rotations

Housing

Synthetic material

Electrical Data

Power supply US

5 V

Max. power supply

42 V

Total resistance

Please see variations

Current Is

1 µA

Max. allowable contact current

10 mA

Characteristic

Max. rotation speed

120 min-1

Temp. coefficient

5 ppm/°K

Direction of rotation

Anti-clockwise

Both rotation directions are available on request

Connectors and Wires

Connector

ASL 6-06-05PA-HE

Connector loom

ASL 0-06-05SA-HE

F 02U 000 226-01

Pin 1 (A)

US

Pin 2 (B)

Gnd

Pin 3 (C)

Sig

Pin 4 (D)

-

Pin 5 (E)

-

Sleeve

DR-25

Wire size

AWG 24

Wire length L

16 to 30 cm

Various motorsport and automotive connectors are available on request.

Please specify the required wire length with your order.

Installation Notes

The products of the RP series can be connected directly to most control units.

The sensor has no internal mechanical stops.

Each mounting orientation is possible.

The sensor meets all EMV, EMC and ESD automotive standards.

Please find further application hints in the offer drawing. www.bosch-motorsport.com

Both rotation directions and other rotation angles available on request.

Free download of the sensor configuration file (*.sdf) for the Bosch Data Logging System at our homepage.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Rotary Position Sensor RP 100

Order number: B 261 209 127-01

Rotary Position Sensor RP 130

Order number: B 261 209 128-02

Rotary Position Sensor RP 308

Order number: B 261 209 570-01

Downloads