Rotary Position Sensor RP 40-H red

This sensor is designed to measure the rotational position of the acceleration pedal.

The electronic is designed with a magnetic rotary sensor with Hall elements and digital signal processing. The angular position is provided by a two pole magnet integrated in the sensor shaft. A Hall effect sensor is disposed between two magnets in association with a movable specially formed ferromagnetic part. This is used to control flux in the sensor in order to produce a linearly varying output voltage dependent on the position.

The main benefit of this sensor is its contactless Hall effect technology and its robust design for motorsport applications.

Features

  • Application: 0 to 40°
  • Technology: Hall contactless
  • Rotating direction: Clockwise
  • Output Signal 1: 4.5 to 0.5 V
  • Output Signal 2: 2.25 to 0.25 V

Application

Application

40° full redundancy

Operating temperature range

-40 to 125°C

Max. Vibration

Vibration Profile 1 (see Appendix or www.bosch-motorsport.com)

Technical Specifications

Mechanical Data

Weight w/o wire

50 g

Protection class

IP67

Mounting

2 x M4

Lifetime

500 x 106 rotations

Housing

Temperature resistant plastic

Electrical Data

Power supply US

5 V ± 0.5 V

Current IS

< 40 mA

Characteristic

Max. rotation speed

120 min-1

Accuracy

< ± 0.5 % FS

Direction of rotation

Clockwise

Signal 1 / Signal 2

Connectors and Wires

Connector

AS 6-07-35PN

F 02U 000 424-01

Mating connector
AS 0-07-35SN

F 02U 000 238-01

Pin 1

Power 5 V Sensor 1

Pin 2

Ground Sensor 1

Pin 3

Signal Sensor 1

Pin 4

Power 5 V Sensor 2

Pin 5

Ground Sensor 2

Pin 6

Signal Sensor 2

Sleeve

FDR-25

Wire size

AWG 24

Wire length L

150 to 1,000 ± 5 mm

Installation Notes

The sensor can be connected directly to most control units.

The sensor is designed with contactless Hall effect technology.

Each mounting orientation is possible.

Sensor is at mid point of electrical angle when shaft and wire exit are aligned as shown in the offer drawing.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Rotary Position Sensor RP 40-H red

Order number: F 02U V01 997-01

Downloads

Documents