USB Upgrade Kit

The Software Upgrade USB enables your DDU or data logger to store data on a USB flash drive. The required hardware is part of the Upgrade and includes an adapter cable to USB-port, a connection socket to the wiring harness and a rugged USB flash drive.

The rugged USB flash drive is securely mounted within a rugged brass housing designed to provide full protection against extreme environmental conditions. It is IP68 protected and resistant to extreme operating temperatures (-30 to 85°C). The USB flash drive is equipped with a rugged protection cap.


  • Capacity 2 GB
  • Robust brass housing
  • High performance push-pull connector


Operating temperature range

-30 to 85°C

Protection class


Tightening torque of Backnut for connection socket

1.5 to 2.0 Nm

Max. vibration

Vibration Profile 3 (see Appendix or

Technical Specifications

Mechanical Data

Housing material



42 g


72 mm

Bore diameter

15.5 mm

Electrical Data


2 GB


USB 1.1/2.0

Data rate

USB 2.0 up to 480 MBit/s

Connectors and Wires

Pin layout for connection to vehicle loom (see also Dimensions)

Pin 1

Data -

Pin 2

+ 5 V

Pin 3


Pin 4

Data +

Installation Notes

The USB flash drive should be fixed on a soft surface to reduce the stress on the USB flash drive.

Ordering Information

USB Kit for DDU 7

Order number: F 02U V01 133-02

USB Kit for DDU 8

Order number: F 02U V00 871-02

USB Kit for C 50

Order number: F 02U V01 133-02

USB Kit for C 60

Order number: F 02U V00 872-02

USB Kit for MS 6

Order number: F 02U V01 993-01


Rugged USB flash drive (included in USB Kit)

Order number: F 02U V01 342-03

Adapter cable to USB-Port (included in USB Kit)

Order number: F 02U V01 343-01

Adapter for wiring harness (included in USB Kit)

Order number: F 02U 002 996-01