Pressure Sensor Combined PSM-SAT

This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air plus temperature.

The sensor utilizes a flush metal diaphragm as a force collector. The force is transferred to a solid state piezo-resistive sensing element via a thin intervening film of noncompressible silicone oil. The housing is welded hermetically. An individual calibration sheet will be delivered with each sensor.

The main feature and benefit of this sensor is a good protection against vibrations.

Features

  • Pressure: 0 to 3.5, 6, 10, 20, 35, 60, 70, 100, 200, 350, 700 bar
  • Temperature: -40 to 150°C
  • Power supply: 8 to 32 V
  • Weight: 15 g

Application

Pressure measurement range versions

3.5 to 700 bar

Pressure reference type

absolute

Operating temp. range

-40 to 150°C

Vibration

2 g (10 Hz to 60 Hz) and 20 g (60 Hz to 1 KHz)

Shock (1/2 sine)

50 g (11 ms) and 200 g (6 ms)

Bio fuel compatibility

E85/M100

Technical Specifications

Mechanical Data

Housing

Stainless steel

Male thread

M8x1

Wrench size

12 mm

Installation torque

2.5 Nm max.

Weight

15 g + 20 g per meter of cable

Sealing

O-ring 6.35 x 1.6 VITON

Ingress Protection

IP66

Electrical Data

Supply voltage

8 to 32 V DC

Max current

< 8 mA

Non-Repeatability

± 0.05 % FSO typ.

CNL & H

± 0.25 % FSO

Bandwidth (-3 dB)

400 Hz

Output “FSO”

0.5 to 4.5 V = 4 V ± 50 mV

Characteristic

Compensated range

20 to 120°C

Long term stability

Offset = 0.1 % span/year; Span = 0.1 %/year

Zero offset at 23°C

0.5 V ± 50 mV (0.5 ± 100 mV for ranges ≤ 10 bar or 150 psi)

Sensitivity/Offset

(an individual calibration sheet will be delivered)

Thermal zero shift “TZS”

± 1 % FSO/100°C (± 2 % FSO/100°C for ranges ≤ 10 bar or 150 psi)

Thermal sensitivity shift “TSS”

± 1 %/100°C (± 1.5 %/100°C for ranges ≤ 10 bar or 150 psi)

Temperature sensor RTD

1,000 Ohms Platinum DIN EN 60751
63 % response time: 3 s max.

Connectors and Wires

Connector

ASU603-05PC-HE

Mating connector

ASU003-05SC-HE

F 02U 000 208-01

Pin 1

Power Supply

Pin 2

Ground

Pin 3

Pressure Signal

Pin 4

Temperature Signal +

Pin 5

Temperature Signal -

Sleeve

Viton

Wire size

AWG 24

Wire length L

15 to 100 cm

Various motorsport and automotive connectors are available on request.

Please specify the required wire length with your order.

Installation Notes

The PSM-SAT can be connected directly to most control units.

Each mounting orientation is possible.

Please do not fix the sensor directly to the engine block to avoid undesired strong vibrations.

100 % relative humidity is possible.

The sensor meets all EMV, EMC and ESD automotive standards.

Please find further application hints in the offer drawing at our homepage.

Safety Note

The sensor is not intended to be used for safety related applications without appropriate measures for signal validation in the application system.

Ordering Information

Pressure Sensor Fluid PSM-SAT

0 to 3.5 bar

Order number: F 02U V01 955-01

Pressure Sensor Fluid PSM-SAT

0 to 6 bar

Order number: F 02U V01 956-01

Pressure Sensor Fluid PSM-SAT

0 to 10 bar

Order number: F 02U V01 980-01

Pressure Sensor Fluid PSM-SAT

0 to 20 bar

Order number: F 02U V01 957-01

Pressure Sensor Fluid PSM-SAT

0 to 35 bar

Order number: F 02U V01 958-01

Pressure Sensor Fluid PSM-SAT

0 to 60 bar

Order number: F 02U V01 962-01

Pressure Sensor Fluid PSM-SAT

0 to 100 bar

Order number: F 02U V01 964-01

Pressure Sensor Fluid PSM-SAT

0 to 200 bar

Order number: F 02U V01 965-01

Pressure Sensor Fluid PSM-SAT

0 to 350 bar

Order number: F 02U V01 966-01

Pressure Sensor Fluid PSM-SAT

0 to 700 bar

Order number: F 02U V02 065-01

Downloads

Documents