Com Interface MSA-Box II

The MSA-Box II is the low cost unit for PC-supported calibration and configuration on Ethernet, K-Line or CAN interface of an ECU.

The MSA-Box II is coupled to the PC via the USB interface. This ensures a powerful and universal link to all common PCs. The coupling to the ECU is effected via Ethernet, K-Line or CAN-interface of the diagnosis interface.

Features

  • Communication interface for PC-supported calibration on K-line, CAN or Ethernet interface

Technical Specifications

Mechanical Data

Size

84 x 38 x 25 mm

Temperature range

0 to 70°C

Compact design

Fully suitable for motor vehicle use

All inputs and outputs to the PC with galvanic separation

Electrical Data

Input voltage (vehicle side)

8 to 32 V

Power supply through the connection to the ECU from board mains with galvanic separation

Power consumption (powered by USB)

Typ. 0.5 W

USB

USB 2.0, high speed (480 MBit/sec)

Ethernet

100 MBit/sec

K-Line

300 Bd up to 320 kBd

CAN

10 kBit/s up to 1 MBit/s

Operating Systems

Windows XP 32 Bit, Vista 32 Bit

Connectors and Wires

Connector

AS612-35PN

F 02U 000 441-01

Mating connector

AS012-35SN

F 02U 000 258-01

Pin 1

Terminal 30 (permanent pos)

Pin 2

Terminal 15 (switch pos)

Pin 3

GND

Pin 4

CAN_High

Pin 10

K-Line

Pin 8

RxD+

Pin 9

RxD-

Pin 11

TxD+

Pin 12

TxD-

Pin 16

CAN_Low

Pin 22

SCR

Diagnosis wire length

2 m

USB wire length

0.5 m

Ordering Information

Com Interface MSA-Box II

Order number: F 02U V00 327-03

Downloads