HP Fuel Pump HDP 5

The HDP 5 is a compact high pressure single piston pump. The design allows achieving a big delivery volume as well as high efficiency, as needed in motorsport applications. Modifications in the number of cam lobes and cam lifts allow different flow requirements to be addressed.

The HDP 5 is equipped with an internal pressure relief valve to limit the maximum fuel pressure. It does not require a fuel return line into the fuel tank.

The pump has an integrated demand control for metering the amount of fuel supplied into the high pressure fuel system. It can be ordered with a compact connector or a motorsport connector.

Depending on the requirements of your engine (e.g. fuel consumption over rotation ratio) we recommend different types of tappets, piston springs and cam profiles. Please notice: Fuel delivery and maximum driveshaft speed depend on cam profile and type of tappet.

Features

  • Max. 1.1 cm3/rotcam
  • 200 bar
  • 780 g
  • Integrated Flow Control Valve
  • Internal Pressure Relief Valve

Application

For high pressure manifold injection or gasoline direct injection

Technical Specifications

Mechanical Data

Mass flow

Please see extra sheet

Efficiency

Please see extra sheet

Body design

Series

Flow capacity and max. engine speed

Depending on cam profile

Nominal pressure Standard version

200 bar

Possible customization

 

 

Rev B (iPRV)

500 bar or customization

 

Rev C (EVO)

= Rev B
+ reduced internal restrictions
+ introduction of EVO parts (outlet valve)

 

Rev D (Piston)

= Rev C
+ bigger piston diameter

 

Flange hole circle diameter

66 mm or 75 mm

 

Flange orientation

free

 

Electrical connector orientation

45° or customization

 

Hydraulic connection design

M14 x 1.5 or customization

 

Hydraulic connection orientation

LP 240° or customization, HP 180° or customization

Weight

Approx. 780 g

Supply pressure

4 to 7 bar

Operating temperature

-40 to 120°C

Storage temperature

-40 to 70°C

Compatible fuels

Unleaded fuels, E22, E85, M15

Fuel temperature

80°C, short term 130°C

Max. vibration

300 m/s2

Connectors and Wires

Electrical connector design

 

Series wire + compact connector

Series wire + motorsport connector

Motorsport wire + open end

Motorsport wire + motorsport connector

Installation Notes

Mounting on cylinder head or adapter flag.

Available cam profiles on request.

Select the cam profile on fuel consumption requirements.

Avoid interference with FCV and hydraulic connections at flange orientation.

Avoid interference with flange at electrical connector orientation.

Please specify the electrical connector design and the wire length with your order.

Ordering Information

 

Standard version

Series wire + compact connector

Order number: F 02U V00 912-03

Standard version

Series wire + motorsport connector

Order number: F 02U V01 114-03

Rev B (iPRV)

Order number: on request

Rev C (EVO)

Order number: on request

Rev D (Piston)

Order number: on request

Accessories

Flat tappet (26 mm)

Order number: F 02U V01 156-01

Roller tappet (26 mm)

Order number: F 02U V01 163-01

Downloads

Documents